Serial Port

Serial Port

Reference > Connections > Terminal (Rebex) >

Terminal_PageSerial_32_256x256

The Serial Port page allows you to configure the port settings to connect to devices using RS232.

 

Serial Port Settings

Port Name

Set the port for communications.

Note

The Port Name must begin with COM.

 

Handshake

Set the handshaking protocol for serial port transmission of data.

 

Baud Rate

Set the speed of the serial port communication.

 

New Line

Set the value that represents the end of the line. Default is \n.

 

Data Bits

Set the standard length of data bits per byte.

 

Parity

Set the parity checking protocol.

 

Stop Bits

Set the standard number of stop bits per byte.

 

Read Timeout

Set the number of milliseconds before a time-out occurs when a read operation does not finish.

 

Write Timeout

Set the number of milliseconds before a time-out occurs when a write operation does not finish.